TM 5-3895-383-24
(3)
Switch terminal. Tighten to a
torque of ..............................2.25 ± 0.25 N m (20 ± 2 lb-in)
(4)
Motor terminal. Tighten terminal to a
torque of............................ 14.7 ± 3.4 N m (130 ± 30 lb-in)
(5)
Ground terminal. Tighten to a
torque of .................................30.5 3.5 Nm (27 ± 31 lb-in)
Solenoid:
Current consumption (draw):
Pull-in current at 20 V ...........................................34 to 38 A
Hold-in current at 20 V ............................................... 6.75 A
3E2298
106-8559
Rotation as seen from drive end ................................... Clockwise
No load conditions at 250C (77°F):
Speed (min) ..............................................................200 rpm
Speed (max) .......................................................... 9700 rpm
Current (min)....................................................................50 A
Current (max) ..................................................................80 A
Voltage .............................................................................23 V
(1)
Battery terminal. Three cables or wire terminal
maximum between nuts. Two cable terminals
maximum with 0 AWG or larger. Tighten nut to
a torque of ........................ 30.5 ± 3.5 N m (270 ± 31 lb-in)
(2)
Motor frame terminal. Tighten terminal to a
torque of ........................................8 ± 3 N m (71 27 lb-ft)
(3)
Switch terminal. Tighten to a
torque of ..............................2.25 ± 0.25 N m (20 ± 2 lb-in)
(4)
Motor terminal. Tighten terminal to a
torque of. ........................ 14.7 ± 3.4 N m (130 ± 30 lb-in)
(5)
Ground terminal. Tighten to a
torque of ........................... 30.5 ± 3.5 N m (270 ± 31 lb-in)
Solenoid:
Current consumption (draw):
Pull-in current at 20 V ..........................................52 to 61 A
Hold-in current at 20V................................................. 14.6 A
9X3416
Rotation as seen from drive end ................................... Clockwise
No load conditions at 25C (77F):
Speed (min) ........................................................... 3300 rpm
Speed (max) .......................................................... 4800 rpm
Current (min) ...................................................................58 A
Current (max) ..................................................................78 A
Voltage ..............................................................................24 V
(1) Battery terminal. Three cables or wire terminal
maximum between nuts. Two cable terminals
maximum with 0 AWG or larger. Tighten nut to
a torque of ........................ 30.5 3.5 Nm (270 ± 31 lb-in)
(2)
Motor frame terminal. Tighten terminal to a
torque of...........................................10 3 Nm (7 2 lb-ft)
(3)
Switch terminal. Tighten to a
torque of ..............................2.25 ± 0.25 N m (20 2 lb-in)
(4)
Motor terminal.
(5)
Ground terminal. Tighten to a
torque of ........................... 30.5 ± 3.5 N m (270 ± 31 lb-in)
Typical example
3E5381
9W3748
Rotation as seen from drive end.................................... Clockwise
No load conditions at 25C (77F):
Speed (min) ........................................................... 3800 rpm
Current (max) ............................................................... 120 A
Voltage .............................................................................24 V
7-21
