TM 5-3895-383-24
Adapter Group
(Engine To Transmission)
(If Equipped)
(1)
Crankshaft.
(2)
Flywheel assembly.
(3)
Hub.
(4)
Flexplate.
(5)
Bolt. Tighten to a torque of ..........................125 ± 15 N m
(90 ± 11 lb-ft)
Magnetic Pickup
Typical Illustration
7W3355
(1)
Clearance between magnetic pickup and flywheel ring
gear ................................ 0.56 to 0.84 mm (.022 to .033 in)
NOTE:
Turn the pickup in until it comes in contact with
the teeth on the flywheel ring gear. Turn the
pickup out 1/2 turn. This will give 0.55 to 0.83 mm
(.022 to .033 in) clearance.
(2)
Tighten the locknut to a torque of....................45 7 Nm
(33 ± 5 lb-ft)
5-38
