TM 5-3895-383-24
(1)
Camshaft idler gear.
Distance between front face of bearing in gear bore and
front face of gear
(dimension A) ..................................................40 ± 0.25 mm
(.016 ± .010 in)
Diameter of shaft (new).......................80.000 ± 0.013 mm
(3.1496 ± .0005 in)
(2)
Camshaft gear.
(3)
Tighten bolts of camshaft idler gear to a
torque of.................................... 70 ± 15 N m (50 ± 11 lb-ft)
(4)
Align timing marks on camshaft idler gear (1) with holes
on camshaft and crankshaft gears (2 and 5).
(5)
Cranks haft gear.
(6)
Oil pump drive gear.
(7)
Apply 9S3263 Thread Lock to the threads of the oil
pump idler gear bolt and tighten to a
torque of..................................... 70 ± 15 N m (50± 11 lb-ft)
(8)
Oil pump idler gear.
Distance between rear face of bearing in gear bore and
rear face of gear
(dimension B).................................................0.7 5 0.25 mm
(.030 ± .010 in)
Diameter of shaft (new).......................28.644 ± 0.013 mm
(1.1277 ± .0005 in)
5-34
