TM 5-3895-383-24
(34)
Tighten bolts (1) to 340 lb-ft (460 Nm).
(35)
Start engine and raise leveling blade (TM 5-3895-383-10).
(36)
Drive Roller with vibratory system operating on dirt surface for 30 to 60 minutes.
(37)
Lower leveling blade, apply parking brake and shut engine off (TM 5-3895-383-10).
(38)
Chock wheels and drum.
(39)
Tighten eight nuts (20) to 340 lb-ft (460 Nm).
(40)
Remove chocks.
b. Removal.
(1)
Start engine and raise leveling blade (TM 5-3895-383-10).
(2)
Move Roller forward until joint where two pad-foot shell halves (11 and 17) meet is at 9:00 and 3:00 positions and bolt is at
6:00 position.
(3)
Lower leveling blade (TM 5-3895-383-10).
(4)
Set parking brake (TM 5-3895-383-10).
(5)
Shut engine off (TM 5-3895-383-10).
(6)
Chock drum and wheels.
(7)
Remove twenty-eight bolts (1) and washers (2) and fourteen scrapers (3) from bumper assembly (6).
(8)
Remove eight nuts (20), sixteen washers (18), and eight bolts (19) from mounting holes of pad-foot shell halves (11 and 17).
2-46