TM 5-3895-383-24
b. Installation.
(1)
Install adaptor (22) and seal (23) in needle valve (6).
NOTE
Install tee to original position and angle.
(2)
Install tee (9) and seal (21) in adapter (22). Tighten
nut (20).
(3)
Install seal (19) and elbow (13) in needle valve (6).
Tighten nut (18).
(4)
Install seal (8) and hose assembly (7) in tee (9).
(5)
Install seal (11) and hose assembly (10) in tee (9).
(6)
Install needle valve (6), seal (14), and elbow (13) in
connector (15). Tighten nut (12).
(7)
Install connector (15) and seal (16) in pump (17).
(8)
Install panel (4) on frame (5) with four washers (2),
two screws (3), and two screws (1).
NOTE
Follow-on Maintenance:
· Fill hydraulic tank.
· Start engine (TM 5-3985-383-10) and
check for leaks.
· Close hood assembly.
· Remove chocks.
END OF TASK
2-41
