TM 5-3895-383-24
2-16. STOWAGE BOX REPLACEMENT
This Task Covers:
a. Removal
b. Installation
INITIAL SETUP
Tools and Special Tool
Equipment Condition
Tool Kit, General Mechanic's: Automotive
Engine OFF (TM 5-3895-383-10)
(SC 5180-90-N26), Tool Number W33004,
Drum and wheels chocked
NSN 5180-00-177-7033
Wrench, Torque (0-175 lb-ft)
NSN 5120-00-640-6364,
(Included in T13152 and W32593)
a. Removal.
(1)
Open lid (1) of stowage box (2).
(2)
Remove four nuts (3), washers (4), bolts (5), washers (4), and stowage box (2) from two plates (6).
(3)
Remove four nuts (7), washers (8), bolts (9), washers (8), and two plates (6) from frame (10).
b. Installation.
(1)
Install two plates (6) on frame (10) with four bolts (9), eight washers (8) and four nuts (7). Snug, but do not tighten nuts.
(2)
Install stowage box (2) on two plates (6) with four bolts (5), eight washers (4), and four nuts (3). Tighten nuts to 40 lb-ft (55
Nm).
(3)
Tighten nuts (7) to 40 lb-ft (55 Nm).
(4)
Close lid (1) of stowage box (2).
NOTE
Follow-on Maintenance: Remove chocks.
END OF TASK
2-50
