TM 5-3895-383-24
2-14. PAD-FOOT SHELL INSTALLATION/REMOVAL
This Task Covers:
a. Installation
b. Removal
INITIAL SETUP
Took and Special Tools
Equipment Condition
Tool Kit, General Mechanic's: Automotive
Roller on level surface
(SC 5180-90-N26), Tool Number W33004,
Hole in drum a 12:00 position
NSN 5180-00-177-7033
Engine OFF (TM 5-3895-383-10)
Shop Equipment, Automotive Maintenance and Repair:
Wheels and drum chocked
OM Common No. 1, Less Power
(SC 4910-95-A74), NSN 4910-00-754-0654,
Personnel Required
Tool No. W32593
Four
Lifting Device (1,690 lbs [767 kg] capacity)
Wrench, Torque (100 - 600 lb-ft),
Materials/Parts
NSN 5120-01-113-9564, (Included in W32593)
Locknuts (10)
a. Installation.
(1)
Remove twenty-eight bolts (1), washers (2), fourteen scrapers (3), four scraper plates (4), and two scraper plates (5) from
bumper assembly (6).
(2)
Remove screw (7), two screws (8) and three washers (9) ad install four scraper plates (4) and two scraper plates (5) on
mounting posts (10).
(3)
Install three screws (7 and 8) and washers (9) in bumper assembly (6) to hold plates (4 and 5) in place.
2-42
