TM 5-3895-383-24
2-12. MANUAL BRAKE RELEASE HAND PUMP REPLACEMENT
This Task Covers:
a. Removal
b. Installation
INITIAL SETUP
Tool and Special Tool
Materials/Parts
Tool Kit, General Mechanic's: Automotive
Seals (2)
(SC 5180-90-N26), Tool Number W33004,
Seals (2)
NSN 5180-00-177-7033
Tags, Identification (MIL-S-29190)
Wrench, Torque (0-175 lb-ft),
1,000 per canon, NSN 8135-00-178-9200
NSN 5120-00-640-6364
Container (1 qt [0.9 1] minimum capacity)
Equipment Condition
Engine OFF (TM 5-3895-383-10)
Drum and wheels chocked
Hydraulic tank drained
Hood opened
a. Removal.
WARNING
Hydraulic oil is very slippery and can
cause falls. To avoid injury, wipe up
spilled oil with rags.
(1)
Place a container with 1 qt (0.91) minimum capacity
under hand pump (1).
NOTE
· Tag and mark all hoses prior to
removal.
· Inspect all hoses, lines, and fittings for
cracks, bends, nicks, dents, stripped
threads,
and
cuts.
Replace
all
damaged parts.
· Cap or plug all hoses.
(2)
Remove two screws (2) ad washers (3) to allow fuel
tank fill tube (4) to move for access.
2-36
