TM 5-3895-383-24
Seat Belt - Inspect
SMCS Code: 7327-040
Illustration 292
Always check the condition of the seat belt. Always check the
condition of the mounting hardware. The checks must be done
before operating the machine.
You must replace the seat belt once during a three-year
period. The belt must be replaced regardless of any damage.
A date label is attached to the bet. The date label will
determine the age of the belt.
Inspect the belt for worn webbing or frayed webbing.
Check for worn buckles on each half of the seat belt. Check
for damaged buckles on each half of the seat belt. Replace
the seat belt or replace the buckles if the belt or the buckles
are damaged.
Illustration 293
Inspect the belt mounting hardware. Replace any worn
hardware or damaged hardware. Keep the mounting bolts
tight.
Steering Cylinder Ends - Lubricate
SMCS Code: 4303-086-BD
Illustration 294
Lower the steering frame lock pin into the locked position.
NOTE:
Wipe all of the fittings before lubricating the
fittings.
Illustration 295
1.
There a two steering cylinders, one on the right side of
the machine and one on the left side of the machine.
Lubricate the front lube fitting (1) on each side of the
machine.
Maintenance Section
Seat Belt - Inspect
1-120
