TM 5-3895-383-24
Pivot Pin (Blade) - Lubricate
SMCS Code: 5219-086-PN
NOTE:
Clean all fittings before you lubricate the fittings.
Illustration 280
There a two grease fittings that mud be lubricated. The fittings
are located at the bottom of the pivot. There is one fitting on
each side of the machine.
Platform Tilting
SMCS Code: 7253-084
In order to permit easy access of the hydraulic components
and the mechanical components, the platform can be tilter
forward.
Illustration 281
1.
Open the engine compartment.
Illustration 282
2.
Turn the battery disconnect switch to the OFF position.
Illustration 283
3.
There are two side panels. One panel is on the right
side of the platform and one panel is on the left side of
the platform. Remove the side panels in order to gain
access to the electrical connectors.
Maintenance Section
Pivot Pin (Blade) - Lubricate
1-117