TM 5-3895-382-24
7.
Remove bearing cup (5) from the carrier housing.
Remove the other bearing cup from the carrier cover.
8.
If necessary, remove six studs (6) from the carrier
housing.
NOTE: Steps 9 through 13 are for the disassembly of the
pinion shaft assembly.
9.
Remove washer (10), outer bearing cone (9) and
bearing cage (8) from pinion shaft (7).
10.
Remove two bearing cups (11) from bearing cage (8).
11.
Remove the snap ring that retains bearing (12) on the
end of the pinion shaft.
12.
Remove pinion bearing spacer (14) from the pinion
shaft.
13.
Remove inner bearing cone (13) and bearing (12) from
pinion shaft (7) with a press.
16-100
