TM 5-3895-382-24
Disassemble and Assemble Vibratory Pump 5070-
017
(9XL229-Up, 3WZ158-Up, 2JM579-Up, 4JZ122-Up, 3TM706-
Up, 5BZ119-Up, 6EN127-Up, 2TN118-Up, 1ZN121-Up, 1FS1-
Up, 1XZ1-Up)(Vibratory Pump Only)
Start By:
a.
Remove the propel or vibratory pump.
NOTE: The propel pumps are similar to the vibratory
pump. The following procedure shows the
disassembly and assembly of the vibratory pump.
For specific differences in the pumps, refer to
TM 5-3895-382-24
1.
Remove seven screws (1) and control valve (2) with the
gasket. Check the gasket for wear or damage and
replace, if necessary.
2.
Remove two plugs (3). Check the seal on the plugs for
wear or damage and replace if necessary.
3.
Remove relief valves (4) and springs (5).
4.
Remove seven screws (6) and cover (7) with the gasket.
Inspect the gasket for wear or damage and replace, if
necessary.
5.
Remove two screws (8) and remove cover (9) with the
gasket. Check the gasket for wear or damage and
replace, if necessary.
16-76
