TM 5-3895-382-24
Steering Wheel & Steering
Column
Remove & Install Steering Wheel &
Steering Column 4309-010
1.
Turn the battery disconnect switch to the OFF position.
2.
Remove three screws (1), and remove cover (2) from
the steering wheel.
3.
Remove nut (3) and the washer, and remove steering
wheel (4) from the steering column. During installation,
tighten nut (3) to a torque of 41 to 54 N·m (30 to 40 lb-
ft).
4.
Remove two bolts (6), and remove cover (5) from
console (7).
5.
Remove four bolts (10), and remove cover (9) from the
column.
6.
Remove three bolts (8) that fasten console (7) to the
column, and move the console out of the way.
7.
While holding steering control unit (12), remove four
bolts (13) that fasten the steering control unit and
steering column (11) to the column. Remove the
steering control unit from the splines on the steering
column. Remove the steering column from the column.
NOTE:
For installation of the steering wheel and steering
column, reverse the removal steps.
16-21
