TM 5-3895-382-24
(13) Back-up ring. (14) O-ring seal. (15) O-ring seat.
(16) Bearing races. (17) Needle thrust bearing. (18) Pin.
(19) Control spool. (20) Control sleeve. (21) Centering spring kit.
17.
Components of the geroter assembly shown in above
photo.
18.
Remove retaining ring (22) and gland bushing (23) from
the control housing.
19.
Disassemble gland bushing (23). Remove dust seal
(24) from seal gland bushing (25). Turn the seal gland
bushing over and remove quad ring seal (26).
20.
Remove set screw (27) from control housing (12).
21.
Install a 1/8" - 24 machine screw into the end of check
ball seat (28). Remove the check ball seat with pliers.
16-18
