TM 5-3895-382-24
Illustration 191
Typical example.
1.
Use Tool (A) to remove three piston rings (1) from
piston (2).
Illustration 192
Typical example.
2.
Use Tool (B) to remove two retaining rings (3).
3.
Remove piston pin (4).
NOTE:
If the piston pin cannot be removed by hand, heat
the piston to a temperature of 45 ±5 ° C
(113° ±9° F).
4.
Remove bearing (5) from connecting rod (6).
Illustration 193
Typical example.
5.
Use a suitable press and a suitable adapter to remove
piston pin bushing (9) from connecting rod (6).
Pistons and Connecting Rods - Assemble
SMCS Code: 1225-016
Assembly Procedure
Table 36
Required Tools
Tool
Part
Number
Part Description
Qty
A
1U-6683
Ring Expander
1
B
1P-1857
Retaining Ring Pliers
1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened
component life.
7-76
