TM 5-3895-382-24
2-7.
HANDRAIL REPLACEMENT (TYPE III)
This Task Covers:
a. Removal
b. Installation
INITIAL SETUP
Tools and Special Tools
Equipment Condition
Tool Kit, General Mechanic's: Automotive
Engine OFF (TM 5-3895-382-10)
(SC 5180-90-N26), Tool Number W33004,
Wheels and drum chocked
NSN 5180-00-177-7033
Wrench, Torque (0-170 lb-ft), NSN 5120-00-
Personnel Required
640-6364, (Included in T13152 and W32593)
Two
a. Removal.
WARNING
·
Handrail weighs 33 lbs (15 kg).
Care should be taken when
handling left and right handrails
to prevent injury to personnel.
·
Failure to hold handrail assembly
in place during removal will allow
handrail assembly to fall and may
cause serious injury or death to
personnel.
NOTE
Note position of handrail assembly
before removal.
(1)
While assistant holds handrail assembly (1),
remove six nuts (2), washers (3) bolts (4),
washers (3) and handrail assembly (1) from
operator platform (5).
b. Installation.
(1)
While assistant positions handrail assembly (1),
install handrail assembly on operator platform
(5) with six bolts (4), twelve washers (3) and six
nuts (2). Tighten nuts to 40 lb-ft (55 Nm).
NOTE
Follow-on
Maintenance:
Remove
chocks.
END OF TASK
2-24
