TM 5-3895-382-24
g. Smooth Drum Scraper Adjustment.
NOTE
Locknuts must be discarded after loosening.
(1)
Remove locknut (1) and washer (2) from
carriage bolt (3), adjustment bar (4), and scraper
(5). Discard locknut.
(2)
Install washer (2) and new locknut (1) on
carriage bolt (3), adjustment bar (4), and scraper
(5). Snug, but do not tighten locknut.
(3)
Repeat Steps (1) and (2) for the three remaining
adjustment bars (4).
(4)
Position scraper (5) to allow 9/16 in. (15 mm)
clearance between edge of scraper and drum
surface (6).
(5)
Tighten locknuts to 120 lb-ft (160 Nm).
NOTE
Follow-on Maintenance: Remove chocks.
END OF TASK
2-19
