TM 5-3895-382-24
b. Installation.
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can give
off harmful vapors, and are harmful
to skin and clothing. To avoid injury
or death, keep away from open fire
and use in a well-ventilated area. If
adhesive,
solvent,
or
sealing
compound gets on skin or clothing,
wash immediately with soap and
water.
(1)
Install seal (10) on hydraulic oil sampling valve
(6).
NOTE
When
installing
hydraulic
oil
sampling valve, position drain of
valve down for ease in sample
collection.
(2)
Apply sealing compound to threads of hydraulic
oil sampling valve (6) and install on manifold (9).
Tighten locking nut (8).
(3)
Install hydraulic oil sampling valve drain cap (5)
on hydraulic oil sampling valve (6).
(4)
Install panel (3) on frame assembly (4) with five
washers (2) and screws (1).
NOTE
Follow-on Maintenance:
·
Fill hydraulic tank.
·
Start engine and check for leaks.
·
Remove chocks.
END OF TASK
2-28
