TM 5-3895-382-24
WARNING
·
Bumper assembly weighs 222 lbs
(101
kg).
Keep
clear
of
equipment when equipment is
being
raised
or
lowered.
Equipment may fall and cause
serious
injury
or
death
to
personnel.
·
Do not allow heavy components
to swing while hanging by lifting
device. Equipment may strike
personnel and cause injury.
·
Exercise extreme caution when
working near a cable or chain
under tension. A snapped cable,
or a shifting or swinging load
may result in injury or death to
personnel.
·
Ensure that bumper assembly is
balanced during removal. An
unbalanced
bumper
assembly
can quickly tip or fall causing
personal
injury
or
death
to
personnel.
(4)
Attach lifting device with minimum 222 lb (101 Kg) capacity to bumper assembly (19).
(5)
Remove six locknuts (11), three washers (12), three washers (13), three bolts (14), three bolts (15), and six
washers (16), from bumper assembly (19) and yoke (17). Discard locknuts.
NOTE
Shims may be present left, right, both, or neither side(s) of yoke.
(6)
Using lifting device, remove bumper assembly (19) and any shims (18) from yoke (17).
(7)
Remove smooth drum assembly (Chapter 16).
(8)
Remove drum support housing from smooth drum assembly (Chapter 16).
(9)
Remove drum gear reducer from smooth drum assembly (Chapter 16).
2-15
