TM 5-3895-382-10
Operation Section
4-21
Machine Controls
Machine Controls
Parking Brake
NOTICE
Do not apply the parking brake while the machine
is moving unless an emergency exists. Use of the
parking brake as a service brake in regular
operation will cause severe damage to the brake
system.
The parking brake knob is located on the
control console at the right side of the seat.
Push the knob down to apply the parking brake.
Pull the knob up to release the parking brake.
NOTE: The propel control lever must be in the
NEUTRAL position before the parking brake
can be released and the machine is allowed to
propel.
Steering Wheel
Directional steering of the machine is controlled by the
steering wheel.
Left Turn - Move the steering wheel in a
counterclockwise direction to steer the
machine to the left. The further the
steering wheel is turned in a counterclockwise
direction, the sharper the left turn.
Right Turn - Move the steering wheel in
a clockwise direction to steer the
machine to the right. The further the
steering wheel is turned in a clockwise direction, the
sharper the right turn.
NOTE: The steering frame lock pin must be removed
to steer the machine. See Before Starting the
Engine for information.
