TM 5-3895-382-10
Operation Section
4-19
Monitoring Systems and Operator
Station Features
Horn
Push the switch down to sound the horn.
Use the horn to alert or to signal
personnel.
Back-up Alarm
The alarm sounds when the propel control lever is in
the reverse position. It is used to alert people behind
the machine that it is backing up.
The back-up alarm is located on the rear of the
machine.
A three position switch (high, low and medium) at the
rear of the back-up alarm regulates its volume.
The alarm is set at the highest sound level when
shipped from the factory. The setting should remain on
high, unless the job site requires a lower level.
