TM 5-3895-382-10
Operation Section
4-24
Machine Controls
Vibration On/Off Switch
A switch on the propel control lever
controls the drum vibration system.
ON - Press the vibration switch to turn the vibration
system ON.
OFF - Press the vibration switch (again) to turn the
vibration system OFF.
NOTE: The vibration control switch must be in the low
amplitude or the high amplitude position before
the vibration can be turned on or off using the
vibration on/off switch.
Leveling Blade Control Lever
The leveling blade control lever, located on the control
console at the right side of the seat, controls the
position of the leveling blade.
Raise (1) - To raise the leveling blade,
move the control lever back to the RAISE
position.
Hold (2) - To hold the leveling blade in
position, allow the leveling blade control
lever to return to center HOLD position.
Lower (3) - To lower the leveling blade,
move the control lever forward to LOWER
position.
Float (4) - To allow the leveling blade to
float, move the leveling blade control lever
all the way forward past the detent to the
FLOAT position.
NOTE: Steer pump oil is used to raise and lower the
leveling blade. This oil flow is prioritized to the
steer system. At low idle, the blade response
will be slower.
