TM 5-3895-379-23
STEERING PUMP REPLACEMENT - CONTINUED
0200 00
REMOVAL - CONTINUED
13,14
8.
Remove bolt (13), washer (14), five bolts (15) and
remove steering pump (2) and gasket (16) from
engine. Discard gasket.
15
2
16 (HIDDEN)
401-897
INSTALLATION
1.
Position new gasket (16) and steering pump (2) on engine.
2.
Install five bolts (15), new lockwasher (14) and bolt (13) securing steering pump (2) to engine.
3.
Connect hose assembly (12) to steering pump (2).
4.
Position tube (11) to engine oil cooler and install hose clamp (10), washer (9) and bolt (8).
5.
Position gauge rod (dipstick) tube (7) to oil pan and tighten nut that fastens the gauge rod (dipstick) tube.
6.
Install clamp (6), washer (5) and bolt (4) to secure gauge rod (dipstick) tube (7) to engine.
7.
Connect hose (3) and (1) to steering pump (2).
2
1,3
401-2097
8.
Fill hydraulic oil tank to correct level (WP 0008 00 and WP 0009 00).
9.
Fill engine cooling system (WP 0052 00).
10.
Close right-side door assembly (TM 5-3895-379-10).
11.
Operate roller and check for proper operation (TM 5-3895-379-10).
END OF WORK PACKAGE
0200 00-3/(0200 00-4 Blank)
