TM 5-3895-379-23
STEERING CYLINDER REPAIR
0201 00
ASSEMBLY - CONTINUED
1.
Install new back-up ring (17), new O-ring (16) and new lip-type seal (15) on inside of head (6).
2.
Install new back-up ring (14) and new O-ring (13) on outside of head (6).
3.
Install new O-ring (12) and new wear ring (11) on piston (9).
4.
Install new O-ring (10) on rod assembly (4) with nut (8).
5.
Install piston (9) and head (6) on rod assembly (4) with nut (8). Tighten nut to 590 + 20 lb-ft (800 + 27 Nm).
6.
Slide head (6) and rod assembly (4) in cylinder assembly (5) and install lockwire ring (7).
7.
Install two new lockwashers (2) and bolts (1) and secure cover (3) and rod assembly (4) in cylinder (5).
8.
Install hydraulic steering cylinder (WP 0121 00).
9.
Operate roller and check for proper operation and leaks (TM 5-3895-379-10).
END OF WORK PACKAGE
0201 00-3/(0201 00-4 Blank)
