TM 5-3895-379-23
BRAKE CONTROL VALVE COIL REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Equipment Condition
Tools and Special Tools
Drums chocked (TM 5-3895-379-10)
Tool kit, general mechanic's (Item 36, WP 0220 00)
References
TM 5-3895-379-23P, Figure 85
REMOVAL
1.
Disconnect electrical connectors (1) and (2).
2.
Bend tabs up on lock (3).
8
3.
Remove nut (4) from shift coil (5) and nut (4) from
brake coil (6).
1
4.
Remove lock (3) and two washers (7) from coils (5)
and (6).
5.
Remove shift coil (5) and brake coil (6) from control
valve (8).
INSTALLATION
2
1.
Install brake coil (6) and shift coil (5) to control valve
(8).
1
2.
Install lock (3) and two washers (7) to coils (5) and
(6).
3.
Install two nuts (4) to shift coil (4) and brake coil (6).
Tighten nuts to 48-70 lb-ft (65-95 Nm).
4.
Bend tabs back on lock (3).
5.
Connect electrical connectors (1) and (2).
6.
Remove chocks (TM 5-3895-379-10).
5
7
2
4
6
7
3
401-2232
END OF WORK PACKAGE
