TM 5-3895-379-23
MAIN WIRING HARNESS REPLACEMENT (CB534C) - CONTINUED
0183 00
REMOVAL - CONTINUED
8.
Disconnect main harness connector from front/rear pump switch connector (TM 5-3895-379-23P, figure 63, item J).
9.
Disconnect main harness connector from fuel solenoid resistor connector (WP 0088 00).
10.
Disconnect main harness connector from turn signal switch connector (TM 5-3895-379-23P, figure 63, item L).
11.
Disconnect main harness connector from engine oil pressure switch connector (WP 0085 00).
12.
Disconnect main harness connector from water temperature sending unit relay connector (WP 0095 00).
13.
Disconnect main harness connector from warning light relay connector (WP 0093 00).
14.
Disconnect main harness connector from hydraulic oil temperature relay connector (WP 0098 00).
15.
Disconnect main harness connector from light circuit breaker connector (WP 0086 00).
16.
Disconnect main harness connector from instrument wiring harness connector (WP 0112 00).
17.
Disconnect main harness connector from functional light relay connector (WP 0112 00).
18.
Disconnect main harness connector from recording module connector (TM 5-3895-379-23P, figure 63, item T).
19.
Disconnect main harness connector from diagnostic warning diode assembly connector (TM 5-3895-379-23P, fig-
ure 63, item U).
20.
Disconnect main harness connector from engine wiring harness connector (WP 0109 00).
21.
Disconnect main harness connector from backup alarm pressure switch connector (WP 0094 00).
22.
Disconnect main harness connector from parking brake switch connector (WP 0069 00).
23.
Disconnect main harness connector from propel control lever connector (WP 0113 00).
24.
Disconnect main harness connector from hydraulic charge oil pressure relay connector (TM 5-3895-379-23P, fig-
ure 63, item Z).
25.
Disconnect main harness connector from starting aid resistor connector (WP 0078 00).
26.
Disconnect main harness connector from throttle control relay connector (WP 0047 00).
27.
Disconnect main harness connector from propel speed range switch connector (WP 0074 00).
28.
Disconnect main harness connector from horn switch connector (WP 0101 00).
29.
Disconnect main harness connector from neutral start relay #1 connector (TM 5-3895-379-23P, figure 63, item
AE).
30.
Disconnect main harness connector from neutral start relay #2 connector (TM 5-3895-379-23P, figure 63, item
AF).
31.
Disconnect main harness connector from brake #1 relay connector (TM 5-3895-379-23P, figure 63, item AH).
32.
Disconnect main harness connector from brake #2 relay connector (TM 5-3895-379-23P, figure 63, item AG).
33.
Disconnect main harness connector from warning light relay connector (TM 5-3895-379-23P, figure 63, item AJ).
34.
Disconnect main harness wire terminals from intermittent water spray timer connector (WP 0076 00).
35.
Disconnect main harness wire terminals from flasher connector (TM 5-3895-379-23P, figure 63, item AL).
36.
Disconnect main harness wire terminals from main relay connector (WP 0067 00).
37.
Disconnect main harness connector from throttle control timer connector (WP 0047 00).
38.
Carefully remove main wiring harness from roller.
0183 00-2
