TM 5-3895-379-23
MAIN WIRING HARNESS REPLACEMENT (CB534B) - CONTINUED
0182 00
INSTALLATION
NOTE
Install new tiedown straps as necessary.
1.
Position loose wiring harness in general installation position.
2.
Connect main harness connector to engine wiring harness connector (WP 0109 00).
3.
Connect main harness connector to diagnostic warning diode assembly connector (TM 5-3895-379-23P, figure 63, item
AP).
4.
Connect main harness connector to instrument wiring harness connector (WP 0112 00).
5.
Connect main harness connector to functional indicator light relay connector (WP 0090 00).
6.
Connect main harness connector to hydraulic oil temperature relay connector (WP 0098 00).
7.
Connect main harness connector to warning light relay connector (WP 0093 00).
8.
Connect main harness connector to water temperature sending unit relay connector (WP 0095 00).
9.
Connect main harness connector to engine oil pressure relay connector (WP 0085 00).
10.
Connect main harness wire terminals to turn signal switch connector (TM 5-3895-379-23P, figure 63, item AF).
11.
Connect main harness wire terminals to fuel solenoid resistor connector (WP 0088 00).
12.
Connect main harness wire terminals to vibration control switch connector (WP 0072 00).
13.
Connect main harness wire terminals to amplitude select switch connector (WP 0073 00).
14.
Connect main harness wire terminals to drum select switch connector (TM 5-3895-379-23P, figure 63, item AB).
15.
Connect main harness connector to drum offset switch connector (TM 5-3895-379-23P, figure 63, item Z).
16.
Connect main harness connector to work light switch control connector (WP 0075 00).
17.
Connect main harness connector to water spray switch connector (WP 0070 00).
18.
Connect main harness connector to parking brake switch connector (WP 0069 00).
19.
Connect main harness connector to backup alarm pressure switch connector (WP 0094 00).
20.
Connect main harness connector to parking brake switch connector (WP 0069 00).
21.
Connect main harness connector to propel speed range switch connector (WP 0074 00).
22.
Connect main harness connector to horn switch connector (WP 0101 00).
23.
Connect main harness connector to propel control lever connector (WP 0113 00).
24.
Connect main harness connector to hydraulic charge oil pressure relay connector (TM 5-3895-379-23P, figure 63, item
Q).
25.
Connect main harness connector to starting aid resistor connector (WP 0078 00).
26.
Connect main harness connector to neutral start relay #2 connector (TM 5-3895-379-23P, figure 63, item L).
27.
Connect main harness connector to neutral start relay #1 connector (TM 5-3895-379-23P, figure 63, item M).
28.
Connect main harness connector to brake #2 relay connector (TM 5-3895-379-23P, figure 63, item K).
29.
Connect main harness connector to brake #1 relay connector (TM 5-3895-379-23P, figure 63, item J).
30.
Connect main harness connector to front intermittent relay connector (TM 5-3895-379-23P, figure 63, item H).
0182 00-3
