TM 5-3895-379-23
MAIN WIRING HARNESS REPLACEMENT (CB534C) - CONTINUED
0183 00
INSTALLATION
NOTE
Install new tiedown straps, as necessary.
1.
Position loose wiring harness in general installation position.
2.
Connect main harness wire terminals to throttle control timer connector (WP 0047 00).
3.
Connect main harness connector to main relay connector (WP 0067 00).
4.
Connect main harness wire terminals to light circuit breaker connector (WP 0086 00).
5.
Connect main harness connector to flasher connector (TM 5-3895-379-23P, figure 63, item AL).
6.
Connect main harness wire terminals to intermittent water spray timer connector (WP 0076 00).
7.
Connect main harness connector to warning light relay connector (TM 5-3895-379-23P, figure 63, item AJ).
8.
Connect main harness connector to brake #2 relay connector (TM 5-3895-379-23P, figure 63, item AG).
9.
Connect main harness connector to brake #1 relay connector (TM 5-3895-379-23P, figure 63, item AH).
10.
Connect main harness connector to neutral start relay #2 connector (TM 5-3895-379-23P, figure 63, item AF).
11.
Connect main harness connector to neutral start relay #1 connector (TM 5-3895-379-23P, figure 63, item AE).
12.
Connect main harness connector to throttle control relay connector (WP 0047 00).
13.
Connect main harness connector to horn switch connector (WP 0102 00).
14.
Connect main harness connector to propel speed range switch connector (WP 0074 00).
15.
Connect main harness connector to starting aid resistor connector (WP 0078 00).
16.
Connect main harness connector to throttle control relay connector (WP 0047 00)
17.
Connect main harness connector to hydraulic charge oil pressure relay connector (TM 5-3895-379-23P, figure 63, item Z).
18.
Connect main harness connector to propel control lever connector (WP 0113 00).
19.
Connect main harness connector to parking brake switch connector (WP 0069 00).
20.
Connect main harness connector to backup alarm pressure switch connector (WP 0094 00).
21.
Connect main harness connector to engine wiring harness connector (WP 0109 00).
22.
Connect main harness connector to diagnostic warning diode assembly connector (TM 5-3895-379-23P, figure 63,
item U).
23.
Connect main harness connector to recording module connector (TM 5-3895-379-23P, figure 63, item T).
24.
Connect main harness connector to instrument wiring harness connector (WP 0112 00).
25.
Connect main harness connector to functional light relay connector (WP 0090 00).
26.
Connect main harness connector to hydraulic oil temperature relay connector (WP 0098 00).
27.
Connect main harness connector to warning light relay connector (WP 0093 00).
28.
Connect main harness connector to water temperature sending unit relay connector (WP 0095 00).
29.
Connect main harness connector to engine oil pressure switch connector (WP 0085 00).
30.
Connect main harness connector to turn signal switch connector (TM 5-3895-379-23P, figure 63, item L).
31.
Connect main harness connector to resistor fuel solenoid resistor connector (WP 0088 00).
32.
Connect main harness connector to front/rear pump switch connector (TM 5-3895-379-23P, figure 63, item J).
33.
Connect main harness connector to auto man switch connector (TM 5-3895-379-23P, figure 63, item G).
0183 00-3
