TM 5-3895-379-23
MAIN WIRING HARNESS REPLACEMENT (CB534B) - CONTINUED
0182 00
REMOVAL - CONTINUED
7.
Disconnect main harness connector from brake #1 relay connector (TM 5-3895-379-23P, figure 63, item J).
8.
Disconnect main harness connector from brake #2 relay connector (TM 5-3895-379-23P, figure 63, item K).
9.
Disconnect main harness connector from neutral start relay #1 connector (TM 5-3895-379-23P, figure 63, item M).
10.
Disconnect main harness connector from neutral start relay #2 connector (TM 5-3895-379-23P, figure 63, item L).
11.
Disconnect main harness connector from starting aid resistor connector (WP 0078 00).
12.
Disconnect main harness connector from hydraulic charge oil pressure relay connector (TM 5-3895-379-23P, fig-
ure 63, item Q).
13.
Disconnect main harness connector from propel control lever connector (WP 0113 00).
14.
Disconnect main harness connector from horn switch connector (WP 0101 00).
15.
Disconnect main harness connector from propel speed range switch connector (WP 0074 00).
16.
Disconnect main harness connector from parking brake switch connector (WP 0069 00).
17.
Disconnect main harness connector from backup alarm pressure switch connector (WP 0094 00).
18.
Disconnect main harness connector from water spray switch connector (WP 0070 00).
19.
Disconnect main harness connector from work light control switch connector (WP 0075 00).
20.
Disconnect main harness connector from drum offset switch connector (TM 5-3895-379-23P, figure 63, item Z).
21.
Disconnect main harness wire terminals from drum select switch connector (TM 5-3895-379-23P, figure 63, item AB).
22.
Disconnect main harness wire terminals from amplitude select switch connector (WP 0073 00).
23.
Disconnect main harness wire terminals from vibration control switch connector (WP 0072 00).
24.
Disconnect main harness wire terminals from fuel solenoid resistor connector (WP 0088 00).
25.
Disconnect main harness wire terminals from turn signal switch connector (TM 5-3895-379-23P, figure 63, item AF).
26.
Disconnect main harness connector from engine oil pressure relay connector (WP 0085 00).
27.
Disconnect main harness connector from water temperature sending unit connector (WP 0095 00).
28.
Disconnect main harness connector from warning light relay connector (WP 0093 00).
29.
Disconnect main harness connector from hydraulic oil temperature relay connector (WP 0098 00).
30.
Disconnect main harness connector from functional indicator light relay connector (WP 0090 00).
31.
Disconnect main harness connector from instrument wiring harness connector (WP 0112 00).
32.
Disconnect main harness connector from diagnostic warning diode assembly connector (TM 5-3895-379-23P, figure 63,
item AP).
33.
Disconnect main harness connector from engine wiring harness connector (WP 0109 00).
34.
Carefully remove main wiring harness from roller.
0182 00-2
