TM 5-3895-379-23
WATER SPRAY PIPE ASSEMBLY MAINTENANCE
THIS WORK PACKAGE COVERS
Removal, Disassembly, Cleaning and Inspection, Assembly, Installation, Adjustment
INITIAL SETUP
Tools and Special Tools
Materials/Parts - Continued
Wood block, approximately 6 in. (152 mm) tall, 6
Tool kit, general mechanic's (Item 36, WP 0220 00)
in. (152 mm) wide, and 12 in. (305 mm) long
Materials/Parts
References
Brush, cleaning (Item 6, WP 0219 00)
TM 5-3895-379-23P, Figure 136
Cloth, cleaning (Item 10, WP 0219 00)
Equipment Condition
Compound, sealing (Item 12, WP 0219 00)
Engine off (TM 5-3895-379-10)
Detergent (Item 14, WP 0219 00)
Drums chocked (TM 5-3895-379-10)
Locknut (2)
Water spray system drained (TM 5-3895-379-10)
NOTE
Front and rear water spray pipe assembly are maintained the same way. Front water spray pipe assembly
is shown.
REMOVAL
1.
Remove two locknuts (1), washers (2) and straps (3) from bumper assembly (4). Discard locknuts.
2.
Lift water spray tank (5) and place wood block between tank and drum (6).
5
WOOD
3
BLOCK
2
1
4
6
401-764
