TM 5-3895-379-23
WATER TANK SCREEN ASSEMBLY MAINTENANCE (CB534C) - CONTINUED
0151 00
REMOVAL - CONTINUED
2.
Remove tube (5) from connector (6) and tube (7) from elbow (8).
3.
Remove fluid filter assembly (9) from water filter (10).
4.
Remove two bolts (11), six washers (12), two nuts (13) and water filter (10) from frame (14).
5.
Remove connector (6), elbow (8), two bushings (15) and two O-rings (16) from fluid filter (10). Discard O-rings.
7
13
8
12
12
15
16
10
14
12
16
15
11
6
5
9
401-743
CLEANING AND INSPECTION
1.
Clean connector, elbow, bushings and strainer assembly with detergent and water. Remove difficult deposits with
cleaning brush.
WARNING
Particles blown by compressed air are hazardous. DO NOT exceed 15 psi (103 kPa) nozzle pressure when
drying parts with compressed air. Use a maximum of 30 psi (207 kPa) when cleaning components. DO NOT
direct compressed air against human skin. Failure to follow this warning may cause injury or death. Make
sure air stream is directed away from user and other personnel in the area. To prevent injury, user must wear
protective goggles or face shield.
2.
Use a cleaning cloth or compressed air to dry metal parts.
3.
Check connector, elbow and bushings for clogging, corrosion or excessive wear.
4.
Check fluid filter assembly for clogging, corrosion, excessive wear and obvious signs of damage.
5.
Check all parts for stripped or damaged threads.
6.
Replace all damaged parts.
0151 00-2
