TM 5-3895-379-23
ENGINE OIL COOLER REPLACEMENT - CONTINUED
0017 00
CLEANING AND INSPECTION - CONTINUED
2.
Use cleaning cloth or compressed air to dry all metal parts.
3.
Check oil cooler and connector for nicks and cracks that could cause leakage. Check for stripped threads. Replace any
damaged parts.
INSTALLATION
1.
Apply a light coat of lubricating oil to new gasket (8) and rubber bushing (9) and install gasket and rubber bushing on oil
cooler (4).
2.
Position oil cooler (4) on oil filter head assembly (7).
NOTE
On CB534B Roller, item 6 is a ring. On CB534C Roller, item 6 is a washer.
3.
Install new connector ring or washer (6) on oil cooler (4).
4.
Install connector (5).
5.
Install hose assemblies (2) and (3) on oil cooler (4) and tighten two clamps (1).
6.
Close right-side door assembly (TM 5-3895-379-10).
7.
8.
9.
Start engine and check for leaks (TM 5-3895-379-10).
END OF WORK PACKAGE
0017 00-3/(0017 00-4 Blank)