TM 5-3895-379-23
OIL FILTER HEAD ASSEMBLY REPLACEMENT (CB534B)
THIS WORK PACKAGE COVERS
Removal, Installation
INITIAL SETUP
Tools and Special Tools
References - Continued
TM 5-3895-379-23P, Figure 15
Shop equipment, common no. 1 (Item 28, WP 0220
Equipment Condition
Engine oil drained and oil filter removed (WP 0013
Materials/Parts
Engine oil sampling valve and tee removed (WP
Gasket
References
TM 5-3895-379-10
REMOVAL
1.
Remove two bolts (1), nut (2), washer (3), spacer (4), oil filter head assembly (5) and gasket (6) from engine (7). Dis-
card gasket.
2.
Remove bolt (8) connector (9) from oil filter head assembly (5).
4
3
2
6
7
5
9
1
8
401-260
INSTALLATION
1.
Install bolt (8), connector (9) on oil filter head assembly (5). Tighten securely.
2.
Install new gasket (6) and oil filter head assembly (5) on engine (7) with spacer (4), washer (3) and nut (2). Tighten bolts
to 33-47 lb-ft (45-64 Nm).