TM 5-3895-379-23
OIL FILTER HEAD ASSEMBLY REPLACEMENT (CB534C) - CONTINUED
0019 00
REMOVAL
1.
Remove oil filter (WP 0013 00).
2.
Remove two bolts (1), two bolts (2), oil filter head assembly (3), gasket (4), access cover (5) and gasket (4). Discard
gaskets.
4
5
4
1
3
1
2
401-2185
CLEANING
WARNING
Cleaning compound, solvent MIL-PRF-680 Type III is an environmentally compliant and low toxic mate-
rial. However, it may be irritating to the eyes and skin. Use protective gloves and goggles. Use in well-ven-
tilated areas. Keep away from open flames and other sources of ignition.
1.
Remove any original gasket material from oil filter head assembly.
2.
Clean all surfaces with cleaning compound, solvent.
3.
Allow surfaces to air dry before installation.
INSTALLATION
1.
Install new gasket (4), access cover (5), new gasket (4), oil filter head assembly (3) with two bolts (2) and two bolts (1).
Tighten bolts to 33-47 lb-ft (45-64 Nm).
2.
Install engine oil cooler (WP 0017 00).
3.
Install hourmeter pressure switch (WP 0084 00).
4.
Install tee and oil sampling valve (WP 0024 00).
5.
Install oil filter and refill engine crankcase (WP 0013 00).
6.
Start engine and check for leaks (TM 5-3895-379-10).
END OF WORK PACKAGE
0019 00-2
