TM 5-3895-379-23
TROUBLESHOOTING PROCEDURES - CONTINUED
0006 00
Table 2. Electrical Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
8.
Alternator Indicator Is On - Continued. 3. Check for loose or damaged 1. If connections are loose, tighten
wiring connections at alternator.
connections.
2. If connectors or wiring is
damaged, replace or repair
connectors or wiring (WP 0108
3. If there are not loose or damaged
connections or damaged wiring,
go to Step 4.
4. Inspect and test batteries (WP 1. If batteries are damaged or bad,
replace batteries (WP 0103 00).
2. If batteries are OK, go to Step 5.
5. Check battery cables and 1. If battery cable connectors are
connectors for looseness or
loose, tighten connectors (WP
damage such as corrosion,
fraying,
broken
terminals,
connectors are damaged, replace
cracked or missing insulation or
cable(s) (WP 0105 00).
kinking.
2. If battery cables are not damaged
and connectors are not loose, go to
Step 6.
B+ TERMINAL
D+
TERMINAL
R TERMINAL
B- TERMINAL
401-207
0006 00-77