TM 5-3895-379-23-2
0270
REMOVAL - Continued
NOTE
Remove electrical tiedown straps as required.
2.
Turn valve handle (Figure 2, Item 7) to closed position (CB534B Roller).
3.
Disconnect water pump connector (Figure 2, Item 5) from connector (Figure 2, Item 6).
NOTE
Note position of elbows to aid in installation.
4.
Remove two elbows (Figure 2, Item 2) and hose assemblies (Figure 2, Item 4) from water spray pump
(Figure 2, Item 8).
CAUTION
Elbows are plastic. Use care when removing hose. Use of excessive force will cause elbows
to break.
5.
Loosen two clamps (Figure 2, Item 3) and remove two hose assemblies (Figure 2, Item 4) from elbows
(Figure 2, Item 2).
6.
Remove two screws (Figure 2, Item 11), plate (Figure 2, Item 10), two clamp halves (Figure 2, Item 1), and
water spray pump (Figure 2, Item 8) from bumper assembly (Figure 2, Item 9).
1
23
1
4
5
6
CLOSED
OPEN
11
7
10
8
2
3
4
9
M0249SWR
Figure 2. Water Spray Pump Removal.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00208)