TM 5-3895-379-23-2
0269
INSTALLATION - Continued
WARNING
Use caution when installing cover on bumper assembly. Failure to follow this warning may
cause injury.
10.
Install cover (Figure 10, Item 3) on bumper assembly (Figure 10, Item 4) with four washers (Figure 10, Item 1)
and bolts (Figure 10, Item 2). Tighten bolts to 180-300 lb-in. (20-34 Nm).
4
3
1
2
M0247SWR
Figure 10.
Water Tank Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Install water level gauge. (WP 0268)
2.
Install water strainer assembly. (WP 0276)
3.
Install water spray check valve. (WP 0274)
4.
Install and adjust water spray pipe. (WP 0267)
5.
Fill water spray system. (TM 5-3895-379-10)
6.
Start engine, operate water spray system, and check for leaks. (TM 5-3895-379-10)
7.
Remove chocks. (TM 5-3895-379-10)
END OF TASK
END OF WORK PACKAGE
0269-9/10 blank
03/15/2011Rel(1.8)root(maintwp)wpno(M00207)