TM 5-3895-379-23-2
0269
INSTALLATION
NOTE
If installing water tank for wiring harness or front or rear support replacement, perform only
Steps (4) and (5) and Steps (9) and (10).
1.
If removed, install straps (Figure 6, Item 3) on bumper assembly (Figure 6, Item 4) with two washers
(Figure 6, Item 2) and bolts (Figure 6, Item 1). Tighten bolts to 22-30 lb-ft (30-41 Nm).
1
2
3
4
M1144SWR
Figure 6. Water Tank Installation.
NOTE
Nut and fitting have left-hand thread.
2.
Install fitting (Figure 7, Item 1), seal (Figure 7, Item 5), and nut (Figure 7, Item 4) in water tank
(Figure 7, Item 2). Tighten nut securely.
3.
Install elbow (Figure 7, Item 3) on water tank (Figure 7, Item 2).
1
2
5
3
4
M1143SWR
Figure 7. Water Tank Installation.
03/15/2011Rel(1.8)root(maintwp)wpno(M00207)