TM 5-3895-379-23-2
0260
INSTALLATION - Continued
10.
Install new gasket (Figure 12, Item 8), new O-ring (Figure 12, Item 6), and connector (Figure 12, Item 9) on
hydraulic oil cooler (Figure 12, Item 7).
11.
Install new gasket (Figure 12, Item 5), new O-ring (Figure 12, Item 6), and connector (Figure 12, Item 4) on
hydraulic oil cooler (Figure 12, Item 7).
12.
Install hose assembly (Figure 12, Item 3) on two elbows (Figure 12, Item 2).
13.
Install elbow (Figure 12, Item 2) on connector (Figure 12, Item 4) and tighten nut (Figure 12, Item 1).
14.
Install elbow (Figure 12, Item 2) on connector (Figure 12, Item 9) and tighten nut (Figure 12, Item 1).
1
2
3
9
8
2
7
6
1
4
5
M0184SWR
6
Figure 12.
Hydraulic Oil Cooler and Fan Shroud Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Install fan guard. (Volume 1, WP 0146)
2.
Install radiator. (Volume 1, WP 0136)
3.
Lower operator platform. (WP 0235)
4.
Fill hydraulic oil tank. (Volume 1, WP 0124)
5.
Start engine and check for leaks. (TM 5-3895-379-10)
END OF TASK
END OF WORK PACKAGE
03/15/2011Rel(1.8)root(maintwp)wpno(M00198)