TM 5-3895-379-23-2
0260
REMOVAL - Continued
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Ensure that any lifting device used is in good condition and of suitable load
capacity. Keep clear of heavy parts supported only by lifting device. Failure to follow this
warning may cause injury or death.
CAUTION
Hydraulic oil cooler is filled with hydraulic oil. Care should be taken not to spill oil during
removal.
NOTE
Hydraulic oil cooler weighs 90 lb (41 kg).
13.
With assistance, remove two locknuts (Figure 5, Item 6), washers (Figure 5, Item 2), washers
(Figure 5, Item 7), rubber mountings (Figure 5, Item 8), rubber mountings (Figure 5, Item 4), hydraulic oil
cooler (Figure 5, Item 3), two washers (Figure 5, Item 2), and screws (Figure 5, Item 1) from frame assembly
(Figure 5, Item 5). Discard locknuts.
1
2
3
4
8
5
7
2
6
M0179SWR
Figure 5. Hydraulic Oil Cooler and Fan Shroud Removal.
03/15/2011Rel(1.8)root(maintwp)wpno(M00198)