TM 5-3895-379-23-2
FIELD MAINTENANCE
HYDRAULIC OIL CAP ASSEMBLY MAINTENANCE
INITIAL SETUP:
Personnel Required
Tools and Special Tools
Construction Equipment Repairer 91L
Tool Kit, General Mechanic's: Automotive
(WP 0289, Table 1, Item 39)
Drill, Hand (WP 0289, Table 1, Item 7)
References
Gloves, Rubber (WP 0289, Table 1, Item 12)
TM 5-3895-379-23P, Figure 31
Goggles (WP 0289, Table 1, Item 13)
Equipment Condition
Materials/Parts
Engine off. (TM 5-3895-379-10)
Cleaning Compound, Solvent
Drums chocked. (TM 5-3895-379-10)
(WP 0288, Table 1, Item 13, 14, 15)
Cloth, Cleaning (WP 0288, Table 1, Item 16)
Gasket (WP 0290, Table 1, Item 116) Qty: 1
Gasket (WP 0290, Table 1, Item 71) Qty: 1
REMOVAL
1.
Remove lock (Figure 1, Item 1) from cap assembly (Figure 1, Item 3).
2.
Lift lever (Figure 1, Item 2) and turn cap assembly (Figure 1, Item 3) counterclockwise until cap can be removed
from hydraulic tank (Figure 1, Item 4).
3.
Remove strainer (Figure 1, Item 6) from hydraulic tank (Figure 1, Item 4).
4.
Remove gasket (Figure 1, Item 5) from strainer (Figure 1, Item 6). Discard gasket.
1
2
6
3
4
5
M0186SWR
Figure 1. Hydraulic Oil Cap Assembly Removal.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00199)