TM 5-3895-379-23-1
0216
REMOVAL
WARNING
Oil is very slippery. Immediately wipe up any spills. Failure to follow this warning may cause
injury.
NOTE
Tag and mark all hoses and wires prior to removal.
Plug holes and cap fittings to prevent spilling oil.
Inspect all hoses, lines, and fittings for cracks, bends, nicks, dents, stripped threads, and
cuts. Replace all damaged parts.
Use drain pan to catch any hydraulic oil that may drain from system. Dispose of oil IAW
local policy and ordinances. Ensure all spills are cleaned up.
1.
Disconnect harness connectors (Figure 1, Items 5 and 6) from solenoid connectors (Figure 1, Items 7 and 8).
2.
Place container with 1 gal. (3.8 Liters) minimum capacity under brake control valve (Figure 1, Item 9).
3.
Remove hoses (Figure 1, Items 1 and 4) and O-rings (Figure 1, Item 2) from tee (Figure 1, Item 3). Discard
O-rings.
1
2
3
2
4
9
5
6
8
7
M0399SWR
Figure 1. Brake Control Valve Removal.
03/15/2011Rel(1.8)root(maintwp)wpno(M00154)