TM 5-3895-379-23-1
0197
REMOVAL - Continued
15.
Remove nut (Figure 11, Item 5), screw (Figure 11, Item 7), and left-front work light assembly
(Figure 11, Item 4) from bracket (Figure 11, Item 6).
16.
Loosen two screws (Figure 11, Item 3) and remove two wires (Figure 11, Item 2) from left-front work light
assembly (Figure 11, Item 4).
17.
Remove front chassis wiring harness (Figure 11, Item 1) from front support assembly, frame assembly, and
yoke assembly.
2
1
3
4
7
6
5
M0294SWR
Figure 11. Front Wiring Harness Removal.
END OF TASK
INSTALLATION
NOTE
Install electrical tiedown straps as required.
1.
Position front chassis wiring harness (Figure 12, Item 1) in frame assembly, yoke assembly, and front support
assembly.
2.
Install two wires (Figure 12, Item 2) on left-front work light assembly (Figure 12, Item 4) and tighten two screws
(Figure 12, Item 3).
3.
Install left-front work light assembly (Figure 12, Item 4) on bracket (Figure 12, Item 6) with screw
(Figure 12, Item 7) and nut (Figure 12, Item 5).
03/15/2011Rel(1.8)root(maintwp)wpno(M00135)
