TM 5-3895-379-23-1
0197
REMOVAL - Continued
6.
Remove screw (Figure 4, Item 5), washer (Figure 4, Item 4), clip (Figure 4, Item 3), and washer
(Figure 4, Item 4) from welded nut (Figure 4, Item 2) on clip assembly (Figure 4, Item 1).
7.
Remove clip (Figure 4, Item 1) from front wiring harness (Figure 4, Item 6).
1
2
4
3
6
4
5
M0287SWR
Figure 4.
Front Wiring Harness Removal.
8.
Disconnect front wiring harness connector (Figure 5, Item 2) from front vibratory sensor connector
(Figure 5, Item 1).
1
2
M0288SWR
Figure 5.
Front Wiring Harness Removal.
9.
Remove two screws (Figure 6, Item 3), washers (Figure 6, Item 2), screw (Figure 6, Item 5), washer
(Figure 6, Item 2), and support (Figure 6, Item 4) from support (Figure 6, Item 1).
03/15/2011Rel(1.8)root(maintwp)wpno(M00135)