TM 5-3895-379-23-1
0196
INSTALLATION
NOTE
Install electrical tiedown straps as required.
1.
Position loose wiring harness in general installation position.
2.
Install cable (Figure 18, Item 3) on starter (Figure 18, Item 4) with new lockwasher (Figure 18, Item 2) and
screw (Figure 18, Item 1). Close cover (Figure 18, Item 5).
3.
Install cable (Figure 18, Item 7) on starter (Figure 18, Item 4) with new lockwasher (Figure 18, Item 9) and nut
(Figure 18, Item 8). Position boot (Figure 18, Item 6) to cover cable end.
1
2
8 9
3
7
4
6
5
M1028SWR
Figure 18. Engine Wiring Harness Installation.
4.
Connect engine wiring harness clip (Figure 19, Item 1) to starting aid (Figure 19, Item 2).
1
2
M1029SWR
Figure 19. Engine Wiring Harness Installation.
5.
Install two wires (Figure 20, Item 4) on fuel level sending unit (Figure 20, Item 5) with two washers
(Figure 20, Item 3), new lockwashers (Figure 20, Item 2), and nuts (Figure 20, Item 1).
03/15/2011Rel(1.8)root(maintwp)wpno(M00134)
