TM 5-3895-379-23-1
0175
REMOVAL - Continued
NOTE
Tag and mark all wires prior to removal.
4.
Remove two nuts (Figure 2, Item 6), lockwashers (Figure 2, Item 7), wires (Figure 2, Items 5 and 9), and
washers (Figure 2, Item 4) from fuel solenoid resistor (Figure 2, Item 8). Discard lockwashers.
5.
Remove four screws (Figure 2, Item 1), lockwashers (Figure 2, Item 2), and fuel solenoid resistor
(Figure 2, Item 8) from panel assembly (Figure 2, Item 3). Discard lockwashers.
2
1
3
9
45
8
7
6
M0930SWR
Figure 2. Fuel Solenoid Resistor Removal.
END OF TASK
INSTALLATION
1.
Install fuel solenoid resistor (Figure 3, Item 8) on panel assembly (Figure 3, Item 3) with four new lockwashers
(Figure 3, Item 2) and screws (Figure 3, Item 1).
2.
Install two washers (Figure 3, Item 4) and wires (Figure 3, Items 5 and 9) on fuel solenoid resistor
(Figure 3, Item 8) with two new lockwashers (Figure 3, Item 7) and nuts (Figure 3, Item 6).
03/15/2011Rel(1.8)root(maintwp)wpno(M00113)