TM 5-3895-379-23-1
0173
REMOVAL - Continued
NOTE
Tag and mark all wires prior to removal.
4.
Remove two screws (Figure 2, Item 3), lockwashers (Figure 2, Item 2), and wires (Figure 2, Items 1 and 8)
from lights circuit breaker (Figure 2, Item 7). Discard lockwashers.
5.
Remove two screws (Figure 2, Item 5), washers (Figure 2, Item 6), and lights circuit breaker (Figure 2, Item 7)
from operator station (Figure 2, Item 4).
1
23
4
8
7
6
5
M0924SWR
END OF TASK
INSTALLATION
NOTE
Before installing lights circuit breaker, ensure that lights circuit breaker is positioned so 20 is
readable.
1.
Install lights circuit breaker (Figure 3, Item 7) in operator station (Figure 3, Item 4) with two washers
(Figure 3, Item 6) and screws (Figure 3, Item 5).
2.
Install two wires (Figure 3, Items 1 and 8) on lights circuit breaker (Figure 3, Item 7) with two new lockwashers
(Figure 3, Item 2) and screws (Figure 3, Item 3).
03/15/2011Rel(1.8)root(maintwp)wpno(M00111)