TM 5-3895-379-23-1
0172
INSTALLATION
NOTE
Install electrical tiedown straps as needed.
1.
Install engine oil pressure switch (Figure 2, Item 2) on elbow (Figure 2, Item 1) and tighten to 180-216 lb-in.
(20-25 Nm).
2.
Connect connector (Figure 2, Item 4) to oil pressure switch connector (Figure 2, Item 3).
4
3
2
1
M1238SWR
Figure 2. Oil Pressure Switch Installation.
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Start engine and check for leaks. (TM 5-3895-379-10)
2.
Close right-side door assembly. (TM 5-3895-379-10)
3.
Remove chocks. (TM 5-3895-379-10)
END OF TASK
END OF WORK PACKAGE
03/15/2011Rel(1.8)root(maintwp)wpno(M00110)