TM 5-3895-379-23-1
0152
INSTALLATION
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Failure to follow this warning may cause injury or death.
CAUTION
Support weight of starter while wire is still attached to starter. Do not allow wire to be stretched
or broken by weight of starter. Allowing wire to stretch or break will cause damage to
equipment.
NOTE
Starter weighs 19 lb (8.6 kg).
1.
Install cable (Figure 5, Item 1) on terminal (Figure 5, Item 7) with new lockwasher (Figure 5, Item 9) and screw
(Figure 5, Item 10).
2.
Close cover (Figure 5, Item 8) on terminal (Figure 5, Item 7).
3.
Install starter (Figure 5, Item 2) and cable (Figure 5, Item 4) on flywheel housing (Figure 5, Item 3) with three
washers (Figure 5, Item 5) and screws (Figure 5, Item 6). Tighten screws to 33-47 lb-ft (45-64 Nm).
1
1
2
10 9
8
7
6
5
4
3
M0843SWR
Figure 5.
Starter Installation.
03/15/2011Rel(1.8)root(maintwp)wpno(M00090)
