TM 5-3895-379-23-1
0152
REMOVAL - Continued
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during
procedure. Failure to follow this warning may cause injury or death.
CAUTION
Support weight of starter while wire is still attached to starter. Do not allow wire to be stretched
or broken by weight of starter. Allowing wire to stretch or break will cause damage to
equipment.
NOTE
Starter weighs 19 lb (8.6 kg).
6.
Remove three screws (Figure 4, Item 6), washers (Figure 4, Item 5), cable (Figure 4, Item 4), and starter
(Figure 4, Item 2) from flywheel housing (Figure 4, Item 3).
7.
Open cover (Figure 4, Item 8) on terminal (Figure 4, Item 7).
8.
Remove screw (Figure 4, Item 10), lockwasher (Figure 4, Item 9), and cable (Figure 4, Item 1) from terminal
(Figure 4, Item 7). Discard lockwasher.
1
1
2
10 9
8
7
6
5
4
3
M0842SWR
Figure 4. Starter Removal.
END OF TASK
03/15/2011Rel(1.8)root(maintwp)wpno(M00090)